Building an app? Need this data? Need this data? API access here

1996 Ford Windstar torque specs

3.0L V6

Change vehicle

Most looked up

Maintenance

  • Air Filter2 specs
    • Air Box ClipsTool-free2 lb-ft3 Nm
    • MAF Sensor Screws3 lb-ft4 Nm
  • Differential Service3 specs
    • Differential Cover Bolts22.1 lb-ft30 Nm
    • Ring Gear Bolt81.1 lb-ft110 Nm
    • Fill Plug25.8 lb-ft35 Nm
  • Tire Rotation2 specs
    • Lug Nuts - Alloy WheelsTorque in star pattern, recheck after 50 miles96 lb-ft130 Nm
    • Lug Nuts - Steel WheelsTorque in star pattern103 lb-ft140 Nm
  • Wheel Alignment2 specs
    • Cam Bolt (adjustment)88.5 lb-ft120 Nm
    • Tie Rod Lock Nut47.9 lb-ft65 Nm

Brakes

  • ABS Module2 specs
    • ABS Module Mounting Bolt7.4 lb-ft10 Nm
    • Brake Line Fitting11.1 lb-ft15 Nm
  • ABS Pump2 specs
    • ABS Module Mounting Bolt7.4 lb-ft10 Nm
    • Brake Line Fitting11.1 lb-ft15 Nm
  • Brake Caliper - Front3 specs
    • Bleeder ScrewDo not overtighten7 lb-ft10 Nm
    • Brake Line Banjo BoltUse new copper washers18 lb-ft25 Nm
    • Caliper Bracket BoltsThreadlocker recommended88 lb-ft120 Nm
  • Brake Caliper - Rear3 specs
    • Bleeder ScrewDo not overtighten7 lb-ft10 Nm
    • Brake Line Banjo BoltUse new copper washers18 lb-ft25 Nm
    • Caliper Bracket BoltsThreadlocker recommended74 lb-ft100 Nm
  • Brake Master Cylinder2 specs
    • Brake Line FittingsUse flare nut wrench11 lb-ft15 Nm
    • Master Cylinder Nuts18 lb-ft25 Nm
  • Brake Master Cylinder Rebuild3 specs
    • Brake Line FittingsUse flare nut wrench11 lb-ft15 Nm
    • Master Cylinder Mounting Nuts18 lb-ft25 Nm
    • Reservoir Mounting Bolts6 lb-ft8 Nm
  • Brake Pads - Front3 specs
    • Caliper Bracket BoltsThreadlocker recommended88 lb-ft120 Nm
    • Caliper Slide Pin BoltsApply silicone brake grease26 lb-ft35 Nm
    • Wheel Lug NutsTorque in star pattern103 lb-ft140 Nm
  • Brake Pads - Rear3 specs
    • Caliper Bracket BoltsThreadlocker recommended74 lb-ft100 Nm
    • Caliper Slide Pin BoltsApply silicone brake grease22 lb-ft30 Nm
    • Wheel Lug NutsTorque in star pattern103 lb-ft140 Nm
  • Brake Pads and Rotors - Front3 specs
    • Caliper Bracket Bolts73.8 lb-ft100 Nm
    • Caliper Slide Pin25.8 lb-ft35 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Brake Pads and Rotors - Rear3 specs
    • Caliper Bracket Bolts73.8 lb-ft100 Nm
    • Caliper Slide Pin25.8 lb-ft35 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Brake Rotor - Front Single8 specs
    • Brake Rotor Set Screw5 lb-ft7 Nm
    • Caliper Bracket Bolts79 lb-ft107 Nm
    • Caliper Mounting Bolts68 lb-ft93 Nm
    • Hub NutIf removed184 lb-ft250 Nm
    • Wheel Lug NutsTorque in star pattern105 lb-ft142 Nm
    • Caliper Bracket Bolts73.8 lb-ft100 Nm
    • Caliper Slide Pin25.8 lb-ft35 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Brake Rotor - Rear Single8 specs
    • Brake Rotor Set Screw5 lb-ft7 Nm
    • Caliper Bracket Bolts79 lb-ft107 Nm
    • Caliper Mounting Bolts68 lb-ft93 Nm
    • Hub NutIf removed184 lb-ft250 Nm
    • Wheel Lug NutsTorque in star pattern105 lb-ft142 Nm
    • Caliper Bracket Bolts73.8 lb-ft100 Nm
    • Caliper Slide Pin25.8 lb-ft35 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Brake Rotors - Front Pair3 specs
    • Caliper Bracket Bolts73.8 lb-ft100 Nm
    • Caliper Slide Pin25.8 lb-ft35 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Brake Rotors - Rear Pair3 specs
    • Caliper Bracket Bolts73.8 lb-ft100 Nm
    • Caliper Slide Pin25.8 lb-ft35 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Front Brake Pad Replacement3 specs
    • Caliper Bracket BoltsThreadlocker recommended88 lb-ft120 Nm
    • Caliper Slide Pin BoltsApply silicone brake grease26 lb-ft35 Nm
    • Wheel Lug NutsTorque in star pattern103 lb-ft140 Nm
  • Rear Brake Shoe Replacement3 specs
    • Backing Plate Bolts44 lb-ft60 Nm
    • Wheel Cylinder Bolts9 lb-ft12 Nm
    • Wheel Lug NutsTorque in star pattern103 lb-ft140 Nm

Engine

  • Cylinder Head R&R1 spec
    • Cylinder Head Bolt (TTY)55.3 lb-ft75 Nm
  • Cylinder Head Resurface1 spec
    • Cylinder Head Bolt (TTY)55.3 lb-ft75 Nm
  • Engine Mount - Front3 specs
    • Engine Mount Through-Bolt63 lb-ft85 Nm
    • Engine Mount-to-Block Bolts48 lb-ft65 Nm
    • Engine Mount-to-Frame Bolts55 lb-ft75 Nm
  • Engine Mount - Rear2 specs
    • Engine Mount Through-Bolt62.7 lb-ft85 Nm
    • Engine Mount Bracket Bolt55.3 lb-ft75 Nm
  • Engine Mounts - All2 specs
    • Engine Mount Through-Bolt62.7 lb-ft85 Nm
    • Engine Mount Bracket Bolt55.3 lb-ft75 Nm
  • Exhaust Manifold1 spec
    • Exhaust Manifold Stud Nut29.5 lb-ft40 Nm
  • Exhaust Manifold Gasket3 specs
    • Exhaust Manifold NutsApply anti-seize, work hot-to-cold22 lb-ft30 Nm
    • Exhaust Manifold StudsIf replacing studs11 lb-ft15 Nm
    • Heat Shield Bolts7 lb-ft10 Nm
  • Fan Belt Replacement3 specs
    • Idler Pulley Bolt30 lb-ft40 Nm
    • Tensioner Bolt18 lb-ft25 Nm
    • Tensioner Pulley Bolt33 lb-ft45 Nm
  • Flexplate1 spec
    • Flywheel/Flexplate Bolt70.1 lb-ft95 Nm
  • Full Engine Tune-Up4 specs
    • Ignition Coil Bolt6 lb-ft8 Nm
    • Spark Plugs - Cast Iron HeadApply anti-seize to threads22 lb-ft30 Nm
    • Throttle Body Bolts7 lb-ft10 Nm
    • Valve Cover BoltsTighten in sequence7 lb-ft10 Nm
  • Head Gasket - Single6 specs
    • Exhaust Manifold NutsApply anti-seize18 lb-ft25 Nm
    • Intake Manifold BoltTighten in sequence18 lb-ft25 Nm
    • Cylinder Head Bolts - Step 1Always use new TTY bolts30 lb-ft40 Nm
    • Cylinder Head Bolts - Step 2Tighten in sequence59 lb-ft80 Nm
    • Cylinder Head Bolts - Step 3Plus 90 degreesTurn 90°
    • Cylinder Head Bolts - Step 4Plus 90 degreesTurn 90°
  • Head Gaskets - Both1 spec
    • Cylinder Head Bolt (TTY)55.3 lb-ft75 Nm
  • Intake Manifold2 specs
    • Intake Manifold Bolt18.4 lb-ft25 Nm
    • Throttle Body Bolt7.4 lb-ft10 Nm
  • Intake Manifold Gasket3 specs
    • Fuel Rail Bolts9 lb-ft12 Nm
    • Intake Manifold BoltTighten in sequence from center out18 lb-ft25 Nm
    • Throttle Body Bolts7 lb-ft10 Nm
  • Oil Change2 specs
    • Oil Drain PlugUse new crush washer26 lb-ft35 Nm
    • Oil Filter (Spin-On)Hand tight plus 3/4 turn15 lb-ft20 Nm
  • Oil Pan Gasket2 specs
    • Oil Drain PlugUse new crush washer26 lb-ft35 Nm
    • Oil Pan BoltTighten in sequence from center outward9 lb-ft12 Nm
  • Oil Pan Replacement2 specs
    • Oil Pan Bolt13.3 lb-ft18 Nm
    • Oil Drain Plug29.5 lb-ft40 Nm
  • Serpentine Belt2 specs
    • Belt Tensioner Bolt41 lb-ft55 Nm
    • Idler Pulley Bolt33 lb-ft45 Nm
  • Serpentine Belt Tensioner1 spec
    • Belt Tensioner Bolt29.5 lb-ft40 Nm
  • Throttle Body2 specs
    • Air Intake Hose Clamps2 lb-ft3 Nm
    • Throttle Body Bolts7 lb-ft10 Nm
  • Transmission Mount4 specs
    • Crossmember Bolt70 lb-ft95 Nm
    • Transmission Mount Bolts48 lb-ft65 Nm
    • Transmission Mount Bolts59 lb-ft80 Nm
    • Crossmember Bolt73.8 lb-ft100 Nm
  • Valve Cover Gasket - Single2 specs
    • Spark Plug Tube SealsIf equipped with separate seals9 lb-ft12 Nm
    • Valve Cover BoltsTighten in sequence7 lb-ft10 Nm
  • Valve Cover Gaskets - Both1 spec
    • Valve Cover Bolts8.9 lb-ft12 Nm
  • Valve Spring - Single2 specs
    • Strut Tower Nut36.9 lb-ft50 Nm
    • Wheel Lug Nut85 lb-ft115 Nm
  • Valve Springs - All2 specs
    • Strut Pinch Bolt66.4 lb-ft90 Nm
    • Wheel Lug Nut85 lb-ft115 Nm

Cooling

  • Coolant Flush5 specs
    • Bleed ScrewOpen during fill5 lb-ft7 Nm
    • Block Drain PlugIf equipped, use new washer18 lb-ft25 Nm
    • Drain PetcockHand tight5 lb-ft7 Nm
    • Hose Clamps3 lb-ft4 Nm
    • Pump Bolts19 lb-ft26 Nm
  • Cooling Fan Clutch2 specs
    • Pressure Plate Bolt25.8 lb-ft35 Nm
    • Transmission Bell Housing Bolt51.6 lb-ft70 Nm
  • Heater Core2 specs
    • Heater Core Hose Clamp2.2 lb-ft3 Nm
    • Dashboard Bolt7.4 lb-ft10 Nm
  • Radiator4 specs
    • Drain PetcockPlastic - hand tight4 lb-ft5 Nm
    • Radiator Mounting BoltDo not overtighten plastic mounts9 lb-ft12 Nm
    • Transmission Cooler LinesIf equipped18 lb-ft25 Nm
    • Upper/Lower Hose Clamps2 lb-ft3 Nm
  • Radiator Removal and Service4 specs
    • Drain PetcockPlastic - hand-tight only4 lb-ft5 Nm
    • Fan Shroud Bolts7 lb-ft10 Nm
    • Radiator Mounting BoltDo not overtighten plastic mounts9 lb-ft12 Nm
    • Transmission Cooler LinesIf equipped, use new washers18 lb-ft25 Nm
  • Thermostat2 specs
    • Coolant Temperature SensorUse thread sealant15 lb-ft20 Nm
    • Thermostat Housing Bolt11 lb-ft15 Nm
  • Thermostat Housing1 spec
    • Thermostat Housing Bolt14.8 lb-ft20 Nm
  • Water Pump3 specs
    • Hose ClampsSpring clamps preferred2 lb-ft3 Nm
    • Thermostat Housing Bolt11 lb-ft15 Nm
    • Water Pump BoltsTighten in criss-cross pattern18 lb-ft25 Nm

Ignition

  • Spark Plug Wires2 specs
    • Spark Plug18.4 lb-ft25 Nm
    • Ignition Coil Bolt5.9 lb-ft8 Nm
  • Spark Plugs4 specs
    • Engine Cover Clips2 lb-ft3 Nm
    • Ignition Coil Bolt6 lb-ft8 Nm
    • Spark PlugGap before install16 lb-ft21 Nm
    • Spark Plugs - Cast Iron HeadApply anti-seize to threads22 lb-ft30 Nm

Fuel system

  • Fuel Filter2 specs
    • Fuel Filter Bracket Bolt7 lb-ft10 Nm
    • Fuel Line FittingsIf threaded type18 lb-ft25 Nm
  • Fuel Pump2 specs
    • Fuel Pump Module Lock RingUse special tool59 lb-ft80 Nm
    • Tank Strap Bolts26 lb-ft35 Nm
  • Fuel Pump Module2 specs
    • Fuel Pump Lock Ring40.6 lb-ft55 Nm
    • Fuel Line Fitting18.4 lb-ft25 Nm
  • Fuel Tank2 specs
    • Fuel Tank Strap Bolt25.8 lb-ft35 Nm
    • Fuel Filler Neck Clamp3.7 lb-ft5 Nm
  • Fuel Tank Strap2 specs
    • Fuel Tank Strap Bolt25.8 lb-ft35 Nm
    • Fuel Filler Neck Clamp3.7 lb-ft5 Nm
  • High Pressure Fuel Pump2 specs
    • Fuel Pump Lock Ring40.6 lb-ft55 Nm
    • Fuel Line Fitting18.4 lb-ft25 Nm

Electrical

  • Alternator4 specs
    • Alternator Mounting Bolts37 lb-ft50 Nm
    • Alternator Pivot Bolt18 lb-ft25 Nm
    • Battery Terminal BoltsDo not overtighten6 lb-ft8 Nm
    • Serpentine Belt Tensioner41 lb-ft55 Nm
  • Alternator Belt2 specs
    • Alternator Mounting Bolt36.9 lb-ft50 Nm
    • Alternator Pivot Bolt29.5 lb-ft40 Nm
  • Battery3 specs
    • Battery Hold-Down Bolt6 lb-ft8 Nm
    • Battery Terminal BoltsDo not overtighten - can crack terminal4 lb-ft6 Nm
    • Battery Tray Bolts9 lb-ft12 Nm
  • Blower Motor2 specs
    • Blower Motor Mounting Screw3 lb-ft4 Nm
    • Blower Motor Resistor Screws1.5 lb-ft2 Nm
  • Blower Motor Control Module1 spec
    • Blower Motor Mounting Screw3.7 lb-ft5 Nm
  • Blower Motor Resistor1 spec
    • Blower Motor Mounting Screw3.7 lb-ft5 Nm
  • Door Lock Actuator - Front1 spec
    • Door Latch Bolt7.4 lb-ft10 Nm
  • Door Lock Actuator - Rear1 spec
    • Door Latch Bolt7.4 lb-ft10 Nm
  • Fuel Pump Relay2 specs
    • Fuel Pump Lock Ring40.6 lb-ft55 Nm
    • Fuel Line Fitting18.4 lb-ft25 Nm
  • Power Window Motor - Front2 specs
    • Window Regulator Bolt7.4 lb-ft10 Nm
    • Door Panel Screws2.2 lb-ft3 Nm
  • Power Window Motor - Rear2 specs
    • Window Regulator Bolt7.4 lb-ft10 Nm
    • Door Panel Screws2.2 lb-ft3 Nm
  • Power Window Regulator - Front2 specs
    • Window Regulator Bolt7.4 lb-ft10 Nm
    • Door Panel Screws2.2 lb-ft3 Nm
  • Power Window Regulator - Rear2 specs
    • Window Regulator Bolt7.4 lb-ft10 Nm
    • Door Panel Screws2.2 lb-ft3 Nm
  • Starter3 specs
    • Heat Shield BoltsIf equipped7 lb-ft10 Nm
    • Starter Mounting BoltLong bolt may need extension37 lb-ft50 Nm
    • Starter Solenoid NutFor B+ cable9 lb-ft12 Nm
  • Starter Solenoid1 spec
    • Starter Mounting Bolt40.6 lb-ft55 Nm
  • Window Motor and Regulator - Front2 specs
    • Window Regulator Bolt7.4 lb-ft10 Nm
    • Door Panel Screws2.2 lb-ft3 Nm
  • Window Motor and Regulator - Rear2 specs
    • Window Regulator Bolt7.4 lb-ft10 Nm
    • Door Panel Screws2.2 lb-ft3 Nm

Suspension

  • Ball Joint - Lower7 specs
    • Control Arm Bolts100 lb-ft135 Nm
    • Lower Ball Joint Nut68 lb-ft93 Nm
    • Pinch BoltNew bolt47 lb-ft64 Nm
    • Wheel Lug Nuts105 lb-ft142 Nm
    • Ball Joint Pinch Bolt40.6 lb-ft55 Nm
    • Lower Ball Joint Castle Nut70.1 lb-ft95 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Ball Joints - Upper and Lower3 specs
    • Ball Joint Pinch Bolt40.6 lb-ft55 Nm
    • Lower Ball Joint Castle Nut70.1 lb-ft95 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Coil Spring - Front3 specs
    • Strut Tower Nut36.9 lb-ft50 Nm
    • Strut Pinch Bolt66.4 lb-ft90 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Coil Spring - Rear1 spec
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Coil Springs - Front Pair3 specs
    • Strut Tower Nut36.9 lb-ft50 Nm
    • Strut Pinch Bolt66.4 lb-ft90 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Coil Springs - Rear Pair1 spec
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Control Arm Bushing - Front Lower3 specs
    • Control Arm Pivot Bolt88.5 lb-ft120 Nm
    • Ball Joint Pinch Bolt40.6 lb-ft55 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Control Arm Bushing - Rear1 spec
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Front Struts - Pair8 specs
    • Control Arm Bolts100 lb-ft135 Nm
    • Strut to Knuckle Bolts77 lb-ft105 Nm
    • Strut Tower Nuts37 lb-ft50 Nm
    • Sway Bar Link47 lb-ft64 Nm
    • Wheel Lug Nuts105 lb-ft142 Nm
    • Strut Tower Nut36.9 lb-ft50 Nm
    • Strut Pinch Bolt66.4 lb-ft90 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Front Suspension Rebuild4 specs
    • Ball Joint Pinch BoltUse new bolt if locknut style37 lb-ft50 Nm
    • Lower Control Arm BoltsTorque at ride height81 lb-ft110 Nm
    • Strut Top Mount Nuts18 lb-ft25 Nm
    • Sway Bar End Link Nuts44 lb-ft60 Nm
  • Lower Control Arm - Front3 specs
    • Control Arm Pivot Bolt88.5 lb-ft120 Nm
    • Ball Joint Pinch Bolt40.6 lb-ft55 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Rear Shocks - Pair4 specs
    • Lower Shock Bolt68 lb-ft93 Nm
    • Upper Shock Mount Nut21 lb-ft28 Nm
    • Wheel Lug Nuts105 lb-ft142 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Rear Suspension Service3 specs
    • Shock Lower Bolt52 lb-ft70 Nm
    • Sway Bar End Link Nuts37 lb-ft50 Nm
    • Trailing Arm BoltsTorque at ride height88 lb-ft120 Nm
  • Shock Absorber Replacement2 specs
    • Lower Mount Bolt66 lb-ft90 Nm
    • Upper Mount NutUse new self-locking nut41 lb-ft55 Nm
  • Strut Assembly - Front4 specs
    • Strut Mount Center NutHold strut shaft with Allen key41 lb-ft55 Nm
    • Strut to Knuckle BoltsOften TTY77 lb-ft105 Nm
    • Strut Tower NutsDo not loosen center nut unless compressed37 lb-ft50 Nm
    • Sway Bar End Link Nuts41 lb-ft55 Nm
  • Strut Bearing3 specs
    • Strut Tower Nut36.9 lb-ft50 Nm
    • Strut Pinch Bolt66.4 lb-ft90 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Strut Mount - Front3 specs
    • Strut Tower Nut36.9 lb-ft50 Nm
    • Strut Pinch Bolt66.4 lb-ft90 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Subframe1 spec
    • Subframe Bolts110.6 lb-ft150 Nm
  • Subframe Bushing1 spec
    • Subframe Bolts110.6 lb-ft150 Nm
  • Sway Bar Link - Front2 specs
    • Sway Bar Link Nuts44.3 lb-ft60 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Sway Bar Link - Rear2 specs
    • Sway Bar Link Nuts44.3 lb-ft60 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Sway Bar Links - Front Pair2 specs
    • Sway Bar Link Nuts44.3 lb-ft60 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm

Steering

  • Power Steering Fluid Flush5 specs
    • Pressure Line FittingNew O-ring26 lb-ft36 Nm
    • Pump Mounting Bolts21 lb-ft28 Nm
    • Steering Rack Bolts79 lb-ft107 Nm
    • Tie Rod Nut42 lb-ft57 Nm
    • Wheel Lug Nuts105 lb-ft142 Nm
  • Power Steering Pump8 specs
    • High Pressure Hose FittingUse new O-rings18 lb-ft25 Nm
    • Power Steering Pump Bolts18 lb-ft25 Nm
    • Pressure Line FittingUse new O-rings22 lb-ft30 Nm
    • Pulley NutHold pulley with pin spanner52 lb-ft70 Nm
    • Pump Mounting Bolts18 lb-ft25 Nm
    • Return Hose Clamp2 lb-ft3 Nm
    • Return Line Clamp3 lb-ft4 Nm
    • Serpentine Belt Tensioner41 lb-ft55 Nm
  • Power Steering Rack3 specs
    • Steering Rack Bolts70.1 lb-ft95 Nm
    • Tie Rod End Nut35 lb-ft47 Nm
    • Steering Line Fitting18.4 lb-ft25 Nm
  • Tie Rod Assembly3 specs
    • Tie Rod End Castle Nut35 lb-ft47 Nm
    • Tie Rod Lock Nut47.9 lb-ft65 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Tie Rod End - Inner3 specs
    • Tie Rod End Castle Nut35 lb-ft47 Nm
    • Tie Rod Lock Nut47.9 lb-ft65 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Tie Rod End - Outer6 specs
    • Tie Rod End NutNew cotter pin35 lb-ft47 Nm
    • Tie Rod Nut42 lb-ft57 Nm
    • Wheel Lug Nuts105 lb-ft142 Nm
    • Tie Rod End Castle Nut35 lb-ft47 Nm
    • Tie Rod Lock Nut47.9 lb-ft65 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Tie Rods - Both Sides3 specs
    • Tie Rod End Castle Nut35 lb-ft47 Nm
    • Tie Rod Lock Nut47.9 lb-ft65 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm

Drivetrain

  • CV Axle - Front5 specs
    • CV Bolts47 lb-ft64 Nm
    • Lower Ball Joint Nut79 lb-ft107 Nm
    • Wheel Lug Nuts105 lb-ft142 Nm
    • Axle Nut184 lb-ft250 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • CV Axles - Front Pair2 specs
    • Axle Nut184 lb-ft250 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Differential Rebuild - Rear3 specs
    • Differential Cover Bolts22.1 lb-ft30 Nm
    • Ring Gear Bolt81.1 lb-ft110 Nm
    • Fill Plug25.8 lb-ft35 Nm
  • Limited Slip Clutch Pack3 specs
    • Pressure Plate Bolt25.8 lb-ft35 Nm
    • Flywheel Bolts70.1 lb-ft95 Nm
    • Transmission Bell Housing Bolt51.6 lb-ft70 Nm
  • Wheel Bearing - Press-In Front3 specs
    • Hub Nut / Axle Nut206.5 lb-ft280 Nm
    • Wheel Bearing Bolts55.3 lb-ft75 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Wheel Bearing - Press-In Rear3 specs
    • Hub Nut / Axle Nut206.5 lb-ft280 Nm
    • Wheel Bearing Bolts55.3 lb-ft75 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Wheel Bearing Hub - Front10 specs
    • ABS Sensor BoltDo not overtighten7 lb-ft10 Nm
    • Axle NutUse new cotter pin after torque184 lb-ft250 Nm
    • Caliper Bracket Bolts88 lb-ft120 Nm
    • Control Arm Bolts100 lb-ft135 Nm
    • Hub Bolts79 lb-ft107 Nm
    • Wheel Bearing Hub BoltsApply threadlocker if specified81 lb-ft110 Nm
    • Wheel Lug Nuts105 lb-ft142 Nm
    • Hub Nut / Axle Nut206.5 lb-ft280 Nm
    • Wheel Bearing Bolts55.3 lb-ft75 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm
  • Wheel Bearing Hub - Rear9 specs
    • ABS Sensor Bolt8 lb-ft11 Nm
    • Axle NutUse new cotter pin after torque184 lb-ft250 Nm
    • Caliper Bracket Bolts81 lb-ft110 Nm
    • Hub Bolts79 lb-ft107 Nm
    • Wheel Bearing Hub BoltsApply threadlocker if specified74 lb-ft100 Nm
    • Wheel Lug Nuts105 lb-ft142 Nm
    • Hub Nut / Axle Nut206.5 lb-ft280 Nm
    • Wheel Bearing Bolts55.3 lb-ft75 Nm
    • Wheel Lug Nut99.6 lb-ft135 Nm

Transmission

  • Transmission Fluid Change3 specs
    • Transmission Drain PlugUse new crush washer if equipped22 lb-ft30 Nm
    • Transmission Filter BoltsIf equipped with bolted filter6 lb-ft8 Nm
    • Transmission Pan BoltsTighten in criss-cross pattern9 lb-ft12 Nm

Exhaust

  • Catalytic Converter - Direct Fit4 specs
    • Hanger Bolts16 lb-ft21 Nm
    • Heat Shield Bolts11 lb-ft14 Nm
    • Catalytic Converter Flange Bolt40.6 lb-ft55 Nm
    • O2 Sensor29.5 lb-ft40 Nm
  • Catalytic Converter - Universal2 specs
    • Catalytic Converter Flange Bolt40.6 lb-ft55 Nm
    • O2 Sensor29.5 lb-ft40 Nm
  • Exhaust Manifold Studs1 spec
    • Exhaust Manifold Stud Nut29.5 lb-ft40 Nm
  • Exhaust Pipe - Rear Section2 specs
    • Exhaust Clamp Bolt33.2 lb-ft45 Nm
    • Exhaust Flange Bolt36.9 lb-ft50 Nm
  • Front Pipe2 specs
    • Exhaust Clamp Bolt33.2 lb-ft45 Nm
    • Exhaust Flange Bolt36.9 lb-ft50 Nm
  • Muffler2 specs
    • Hanger Bracket Bolts18 lb-ft25 Nm
    • Muffler Clamps41 lb-ft55 Nm
  • Resonator2 specs
    • Exhaust Clamp Bolt33.2 lb-ft45 Nm
    • Exhaust Flange Bolt36.9 lb-ft50 Nm

Heating and A/C

  • AC Compressor3 specs
    • AC Compressor Bolts18 lb-ft25 Nm
    • AC Line FittingsUse new O-rings, add PAG oil15 lb-ft20 Nm
    • Clutch Connector Bolt6 lb-ft8 Nm
  • AC Compressor Oil Add2 specs
    • AC Compressor Bolts22.1 lb-ft30 Nm
    • AC Line Fitting14.8 lb-ft20 Nm
  • AC Condenser2 specs
    • AC Line FittingsUse new O-rings15 lb-ft20 Nm
    • Condenser Mounting Bolts9 lb-ft12 Nm
  • AC Recharge1 spec
    • Compressor Bolts26 lb-ft36 Nm

Body

  • Liftgate Strut2 specs
    • Strut Tower Nut36.9 lb-ft50 Nm
    • Wheel Lug Nut85 lb-ft115 Nm
  • Rear Window1 spec
    • Wiper Arm Nut11.1 lb-ft15 Nm
  • Windshield1 spec
    • Wiper Arm Nut11.1 lb-ft15 Nm
  • Windshield Molding1 spec
    • Wiper Arm Nut11.1 lb-ft15 Nm

Torque is shown in lb-ft with Nm below it. Where a step says to turn, tighten the listed angle after the torque step before it. Use new bolts where the note says so.

Need labor times, fluids or repair steps for this car? See it on the Open Labor Project